Tag Archives: mobile tool base

Making a Mobile Mitre Saw Stand (Part 1)

Back in 2011 just after I started woodworking I was driving back from the library and saw a sign for a garage sale.  In those days I thought I needed every tool that existed and so stopped in to see what they had. It was late in the afternoon and the seller was just packing up, but when I said I was looking for tools they showed me what was left.

I ended up walking away with an old GMC mitre saw for $20 and it’s been in constant use since that time. The problem is that it’s never had a proper home, instead being dumped onto whatever surface was clear when I needed to use it. I decided recently to change that as I’ve been trying to get the workshop more organised and thought a combined stand for the saw and my old vacuum would be nice.

The stand I made for my drill press (in the back corner of the below photo) has held up really well so decided to use the same style for this one. I started with a piece of 1200mm x 450mm MDF from the local hardware store and placed the mitre saw on it to get a feel for how wide the stand should be. I decided that even though the saw is only around 400mm wide, I’d just halve the sheet and make the stand a little wider both for stability and to make the build easier. This also gives me some room underneath for more storage.

CameraZOOM-20150905143945893

The lengths of timber I’d bought for the sides of the frame were also 1200mm so I just marked the cut halfway after checking that they were actually the right length and not over or under.

CameraZOOM-20150905144701224

I’m finding blue masking tape very useful around the workshop for bundling parts together. This helps me to keep the cut pieces together until I’m ready to assemble and also to make sure they are all the same size. It also helps to stop me picking up one of them and thinking it’s spare stock and using it to cut another piece from – this has happened!

CameraZOOM-20150905145830782

Once I’d cut everything to size and bundled it together I was ready to start assembling

CameraZOOM-20150905151826704

I did a test fit of all the parts so I could make sure everything fit before I did anything else, just in case, but it all looked good.

CameraZOOM-20150905152420466

The MDF got cut to start with. I couldn’t be bothered setting up sawhorses for one cut so did it this way, which actually was a lot more stable than I expected and worked just fine

CameraZOOM-20150905152849337

I pre-drilled and countersunk everything to make assembly easier.

CameraZOOM-20150905160817003

Then I assembled and squared the side frames, using glue and screws to make it nice and solid

CameraZOOM-20150905160742594

Once the side frames were done it was easy to put the cross pieces in, using corner clamps to make it square as well.

CameraZOOM-20150905172225107

It was getting late in the day but I wanted to get the top and bottom in place before finishing up so just nailed them in place. The uprights are a bit thin but I plan to put a shelf in and a back on so this won’t be an issue when finished.

CameraZOOM-20150913101514494

Advertisements